Presentation Switcher CYP EL-8500VA

Presentation Switchers

CYP

Šifra: EL-8500VA

The EL-8500VA is a multi-format scaling HDMI, USB Type C, HDBaseT, and VGA input presentation switch, which allows the user to output at a scaled resolution of the user’s choosing over the mirrored HDMI and HDBaseT outputs. The HDMI and USB-C ports support resolutions up to 4K @ 60 (4:4:4, 8-bit) while the HDBaseT output supports automatic down-conversion of 4K 60(4:4:4) sources to 4K 60(4:2:0). The VGA inputs support resolutions up to WUXGA. The HDBaseT output provides a great solution to extend your audio and video up to 70 meters (at 4K) over a single run of Cat.5e/6/7 cable as well as providing 48V PoH power to compatible HDBaseT Receivers.

Cijena:

3.805,67 €

Niža cijena

3.119,40 € (bez 22 % PDV)

Dodaj u košaricu

Usporedi Ukloni

Naslov

CYP vrsta

Presentation Switchers

Opis proizvoda i datoteke
Tehničke specifikacije
Pošaljite upit

Opis proizvoda i datoteke

Supports switching and scaling of all AV inputs for display over the mirrored HDMI and HDBaseT outputs
Supports up to 4K UHD (18 Gbps, 4K @ 50/60 Hz 4:4:4, 8-bit) video input and output Note: The HDBaseT output will automatically down-convert 4K 50/60(4:4:4) sources to 4K 50/60(4:2:0) to maintain compatibility
HDBaseT output transmits video and audio over a single Cat.5e/6/7 cable up to 100 m at 1080p and 70 m at 4K
Supports pass-through of many audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream
Audio mixer function allows the mixing of audio from any analog input with the microphone input
Built in 2 x 20 watts audio amplifier
Trigger Control Keypad support for easy, single-button, function activation (Optional)
Supports standard 48V PoH from the HDBaseT output (PSE) to a connected HDBaseT Receiver (PD) (compatible Receivers only)
Comprehensive EDID and HDCP management (HDCP 2.2)
Controllable via front panel controls with OSD, RS-232, Telnet, WebGUI, and triggers
USB for service/firmware updates

This unit also includes multiple analogue stereo audio inputs and a microphone input along with an amplified analogue stereo output to provide a range of audio routing and mixing flexibility. The built-in audio mixer function allows the user to mix audio from any analogue input with the microphone input for presentation or lecture theatre usage. The ability to switch back and forth between mixed and non-mixed audio simplifies the presentation experience.

A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a podium or within a table in a conference room or classroom. This interface can allow the user to activate functions with the simple press of a button. Standard control is available via front panel buttons with an On-Screen Display (OSD), WebGUI, Telnet and RS-232.

upute za korištenje CYP EL-8500VA

Tehničke specifikacije

Naslov

CYP vrsta

Presentation Switchers

Pošaljite upit

Odgovaramo u najkraćem mogućem vremenskom roku.

Presentation Switcher CYP EL-8500VA

Što ćete dobiti pretplatom na Newsletter?