The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 100 meters over category cable with Ethernet, RS-232 and IR control pass-through. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232 and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management.
Jeste li pronašli nižu cenu?
Kupujete veću količinu?
Potrebna vam je ponuda za dalju prodaju?
Za poboljšanje cene pošaljite upit.
FEATURES
4K/UHD capability
HDCP 2.2 compliant
Supports 4K HDR10 @ 24 Hz
PSE – Power Sourcing Equipment
AV, Ethernet, power and control over HDBaseT
Extended distance HDMI extension
Rear panel I/O connectors
Multi-channel audio compliant
Field updatable firmware
Front panel Power and Link status LEDs
Power chaining
Low-profile, 1 inch (2.5cm) high quarter rack-width enclosure
Included accessories
The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 100 meters over category cable with Ethernet, RS-232 and IR control pass-through. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232 and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.
This HDBaseT Class A transmitter is designed to support the growing number of displays and video projectors in the commercial market with HDBaseT inputs. Built-in Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher to the display or remote input device. Installer-friendly features include: a rack-mountable form factor that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.
Šaljećemo vam jednom mesečno:
