The Atlona AT-OME-ST31A is a 3 × 1 switcher and HDBaseT transmitter designed for remote powering with HDMI and USB-C inputs. The OME-ST31A features two-channel audio de-embedding to an analog balanced audio output. Part of the Omega Series of integration products for modern AV communications and collaboration, the OME-ST31A features mirrored HDMI and HDBaseT outputs and is HDCP 2.2 compliant. The USB-C input is ideal for AV interfacing with newer Mac, Chromebook and Windows PCs, as well as smartphones and tablets. Video signals up to 4K/60 4:2:0, plus embedded audio, control and Ethernet can be transmitted over HDBaseT up to 100 meters. All inputs and the local HDMI output support 4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps.
Jeste li pronašli nižu cenu?
Kupujete veću količinu?
Potrebna vam je ponuda za dalju prodaju?
Za poboljšanje cene pošaljite upit.
FEATURES
3 × 1 HDBaseT switcher with HDMI and USB-C inputs
Mirrored HDBaseT and HDMI outputs
Video, audio, power and data over category cable utilizing HDBaseT technology
4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling on local ports (HDMI and USB-C), plus support for HDR formats
HDCP 2.2 compliant
Selectable 4K to 1080p downscaling
Remote powering over HDBaseT or local powering
Automatic display control
Automatic input selection using hot plug detect and video detection technology
Audio de-embedding
Multi-channel audio compliant
EDID management
HDCP management
Integrated HDBaseT link status monitoring
Intuitive GUI-based configuration using integrated web server
TCP/IP and RS-232 control
Easy to configure and manage with AMS (Atlona Management System)
Field-updatable firmware
Front panel power and signal status LEDs
Low-profile, 1.02 inch (26 mm) high enclosure
Included accessories
The Atlona AT-OME-ST31A is a 3 × 1 switcher and HDBaseT transmitter designed for remote powering, with HDMI and USB-C inputs. The OME-ST31A features two-channel audio de-embedding to an analog balanced audio output. Part of the Omega Series of integration products for modern AV communications and collaboration, the OME-ST31A features mirrored HDMI and HDBaseT outputs and is HDCP 2.2 compliant. The USB-C input is ideal for AV interfacing with newer Mac, Chromebook and Windows PCs, as well as smartphones and tablets. Video signals up to 4K/60 4:2:0, plus embedded audio, control, and Ethernet can be transmitted over HDBaseT up to 100 meters. All inputs and the local HDMI output support 4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps. Additionally, 4K downscaling to 1080p @ 60, 30 or 24 Hz is available for the HDMI output when connected to an HD sink. The OME-ST31A is designed for use with Omega Series receivers and switchers, select HDVS Series receivers such as the AT-HDVS-SC-RX scaler, the AT-UHD-EX-100CE-RX receiver and other Atlona switchers with HDBaseT inputs.
All-in-One Switcher, Controller and Extender
This switching transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic input selection and display control. It can be remotely powered by Atlona HDBaseT-equipped devices. With the optional AT-PS-245-D4 power supply, the OME-ST31A can charge laptops and mobile devices through the USB-C port. For additional integration convenience, the OME-ST31A features TCP/IP and RS-232 control, RS-232 insertion over HDBaseT and remote management with Atlona Management System (AMS).
Automatic Display Control
The OME-ST31A provides control to a display through TCP/IP, RS-232, or CEC, without the need for a separate control system. This simplifies system design and integration while reducing costs. With automatic display control, the OME-ST31A can trigger a display to power on automatically whenever a laptop or other device is connected. At the end of the presentation, when the presenter disconnects the laptop, the OME-ST31A forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. The OME-ST31A display control capability can also be triggered by an external control system.
Reliable Auto-Switching
The OME-ST31A automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.
Applications
Šaljećemo vam jednom mesečno:
