Kategorije

Besplatan savjet +386 (0)1 620 77 25

Moj račun

Prijava Registracija Zaboravljena lozinka

Dostava: Besplatna

Sveukupno: 0,00 €

Pregled košarice

Početna stranica Proizvodi Upravljanje signalom i druga rješenja Atlona Switchers AT-HDVS-200-TX-PSK

Switcher Atlona AT-HDVS-200-TX-PSK

Switchers

Atlona

Šifra: AT-HDVS-200-TX-PSK

The Atlona AT-HDVS-200-TX-PSK is a 3 × 1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control, and Ethernet can be transmitted up to 100 meters. The two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT transmission. The HDVS-200-TX-PSK is identical to the AT-HDVS-200-TX, with the addition of local powering capability and an external power supply. This makes it ideal for extending AV and control directly to a projector with an HDBaseT input. The HDVS-200-TX-PSK can serve as the central component of a compact, fully automated AV system with the convenience of automatic input selection, and by sending RS-232 or Ethernet control commands to the projector.

Cijena:

1.220,00 €

Niža cijena

1.000,00 € (bez 22 % PDV)

Dodaj u košaricu

Usporedi Ukloni

Naslov

Opis proizvoda i datoteke
Tehničke specifikacije
Pošaljite upit

Opis proizvoda i datoteke

FEATURES

3 × 1 HDBaseT switcher

Features two HDMI inputs plus a VGA input with audio
Allows advanced HDMI display devices to be used with legacy VGA sources
Audio input can be assigned to any of the video inputs
Audio-only playback available without video signal present

Local AC powered version of AT-HDVS-200-TX

Includes external power supply – ideal for point-to-point installations with an HDBaseT-equipped projector
Also can be powered via PoE (IEEE 802.3af Powered Device – PD) – provides an additional powering option through a compatible Atlona HDBaseT-equipped device, or the optional AT-PS-POE power injector

Automatic display control

Automatically changes projector power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
Enables display and volume control. CEC enables control of consumer displays.
Eliminates the need for a complex AV control system

Automatic input selection using hot plug detect and video detection technology

Selects active input when sources are connected or if there is a change in source power status
Enables simplified, automatic system operation with no user intervention necessary

TCP/IP and RS-232 control of switcher

Flexible control options for compatibility with third-party control systems
Reduces integration time and costs

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
Allows 4K/UHD transmission when used with a compatible HDBaseT-equipped display or HDBaseT receiver, such as the AT-OME-RX21

HDCP 2.2 & 1.4 compliant

HDCP 1.4 compliant when used with the AT-HDVS-200-RX
HDCP 2.2 compliant when used with an HDCP 2.2 compliant receiver or switcher, such as the AT-OME-RX21 or HDBaseT-equipped projector
Allows protected content stream to pass between authenticated devices

Extended distance HDBaseT extension

Transmits AV, control, and Ethernet up to 100 meters @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
Uses easy-to-integrate category cable for low-cost, reliable system installation

EDID management

Manages EDID communications between source and switcher; allows integrators to force a source to a preferred resolution
Ensures desired audio formats and video resolutions are provided to the AV system

HDCP management

HDCP compliance can be disengaged through AMS or a control system
Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

Front panel input select button

Overrides auto-switching when more than one active source is present
Simple manual operation allows presenter to maintain control of AV system

Front panel display on/off control

Remotely controls display power state
Alternate mode available to mute video output and send display into standby
Eliminates need for manual operation of display or use of IR remote control

Front panel volume control

Remotely controls a display’s internal audio volume using TCP/IP or RS-232
Muting also available via AMS or third-party control system
Eliminates need for manual operation of display or use of IR remote control

Integrated HDBaseT link status monitoring

Continuously monitors integrity of the HDBaseT cable link between the transmitter and the receiver
Web GUI provides real-time link status, plus detailed HDBaseT and HDMI signal information
Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality

Configured and managed by AMS (Atlona Management System)

This IP-controllable product is remotely managed by the Atlona Management System software
Integrates product configuration, management, and updates to reduce installation time and enable remote support

Field-updatable firmware

Rear panel USB port provides an easy means for device updates
Ensures long-term system return on investment

Front panel power and input selection status LEDs

LED indicators provide power and input selection status information
Provides easy setup and troubleshooting

Included accessories

User guide, surface mounting brackets, and external universal power supply

The Atlona AT-HDVS-200-TX-PSK is a 3 × 1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control and Ethernet can be transmitted up to 100 meters. The two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT transmission. The HDVS-200-TX-PSK is identical to the AT-HDVS-200-TX, with the addition of local powering capability and an external power supply. This makes it ideal for extending AV and control directly to a projector with an HDBaseT input. The HDVS-200-TX-PSK can serve as the central component of a compact, fully automated AV system with the convenience of automatic input selection, and by sending RS-232 or Ethernet control commands to the projector. With automatic display control capability, the HDVS-200-TX-PSK can power the projector on or off whenever a source is connected or disconnected from the unit.

All-in-One Switcher, Controller and Extender

The HDVS-200-TX-PSK combines the benefits of auto-switching and integrated display control, and the advantages of HDBaseT signal transmission. It enables input selection, volume, and display on/off control from the front panel or external RS-232 or TCP/IP commands. The HDVS-200-TX-PSK incorporates many popular integration convenience features while delivering excellent value for classrooms, huddle rooms, and meeting spaces.

Surface mounting brackets are provided with the HDVS-200-TX-PSK for easy under-table, furniture, or on-wall installation.

Automatic Display Control

The HDVS-200-TX-PSK provides control to a projector through TCP/IP, RS-232, or CEC*, without the need for a separate control system. This simplifies system design and integration while reducing costs. With automatic display control, the HDVS-200-TX-PSK can trigger a display to power on automatically whenever a laptop or other device is connected. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-200-TX-PSK forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. The HDVS-200-TX-PSK display control capability can also be triggered by an external control system.

A power button on the front panel can be used for manual on/off control of either the HDVS-200-TX-PSK or the display. Front panel volume controls are also available to control the display’s internal audio, or another device with volume control, such as a DSP or another switcher.

Reliable Auto-Switching

The HDVS-200-TX-PSK automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.

Applications

Simple yet complete AV systems with HDBaseT-equipped projectors and flat-panel displays
Installations in which HDVS-200 Series transmitters are to be used with third-party HDBaseT devices

specifikacije Atlona AT-HDVS-200-TX-PSK upute za korištenje Atlona AT-HDVS-200-TX-PSK

Tehničke specifikacije

Naslov

Pošaljite upit

Odgovaramo u najkraćem mogućem vremenskom roku.

Switcher Atlona AT-HDVS-200-TX-PSK

Što ćete dobiti pretplatom na Newsletter?