The Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseT receiver for AV signals up to 100 meters over category cable with Ethernet, RS-232 and IR control pass-through, plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
Have you found a lower price?
Are you buying a larger quantity?
Do you need a quote for further resale?
Send an inquiry for price improvement.
FEATURES
4K/UHD capability
HDCP 2.2 compliant
Adheres to latest specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
Remote-powered receiver
AV, Ethernet, power and control over HDBaseT*
Extended distance HDMI extension
Flexible Bidirectional IR control capabilities
Rear panel I/O connectors
Multi-channel audio compliant
Field updatable firmware
Front panel Power and Link status LEDs
Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
Included accessories
The Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseT receiver for AV signals up to 100 meters over category cable with Ethernet, RS-232 and IR control pass-through, plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by the Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through Ethernet and RS-232 commands.
We will send you once a month:
