Networked AV Atlona AT-OMNI-111-WP

FEATURES
 

Best-in-class AV over IP performance and reliability over Gigabit Ethernet

• Delivers pristine image quality and ultra-low latency over 1 Gbps (GbE) networks
• Ideal for integration over new or legacy network cable infrastructure – including CAT 5e

US two-gang enclosure for wallplate openings – interchangeable black or white trim kits

• Allows inconspicuous installation on a wall, in furniture, or in a floor box
• Includes black and white wallplates and faceplates
• Meets end user requirements for conveniently accessible yet discreet AV connectivity

AV encoder for HDMI up to 4K/UHD, plus embedded audio

• Streams video and audio, with the flexibility of transmitting them together or to separate network destinations
• Allows wide-ranging versatility for integrators to design systems to specific requirements

Networked AV redundancy

• Maximizes system reliability and meets IT requirements for system redundancy and failover

Supports UHD @ 60 Hz plus HDR formats

• Ideal for new and emerging UHD and HDR-capable sources and displays
• Supports HDR10 @ 60 Hz and 10-bit color, as well as HLG (Hybrid Log-Gamma) for 60p HDR broadcast services
• Supports Dolby Vision™ @ 60 Hz and 12-bit, delivering a best-in-class dynamic HDR experience.Included as of firmware version 1.2.5.

High performance, visually lossless video compression

• SMPTE 2042 VC-2 light video compression with absolutely minimal, sub-frame latency from encode to decode
• Ensures optimal, pristine-quality graphics and motion video presentations, and is ideal for applications requiring interactivity

Supports virtual reality applications

• Compatible with HTC VIVE® VR system at 2160×1200 @ 90 Hz

HDCP compliance

• Adheres to the latest HDCP 2.2 specification for High-bandwidth Digital Content Protection
• Allows protected content streams to pass between authenticated devices
• HDCP can be disabled through AMS, allowing content to pass to non-compliant displays and teleconference systems. Protected content is not transmitted.

Network error resilience with FEC (forward error correction)

• Compensates for AV packet losses in large systems spanning several networks
• Enables consistent, reliable performance in enterprise-wi­­de networked AV implementations

Simplify integration with plug-and-play network switch compatibility

• Streamline system setup by using Atlona Certified Switch configurations for popular models from Cisco, Pakedge, and many others
• Saves installation time and costs without the need to manually configure a network switch

Remote PoE (Power over Ethernet) powering

• With PoE, encoders can conveniently be powered over the network from a PoE-equipped network switch
• PoE simplifies integration without the need for local AC power, and allows centralized power monitoring and management

Secure content distribution with AES-128 encryption

• Any AV presentation content can be secured by scrambling IP streams
• Ensures secure content delivery across the network
• Ideal for government, military, and enterprise applications, as well as meeting IT security requirements

Supports industry-standard, network security features and protocols

• HTTPS, Telnet, SSH, WebSockets with TLS, and AES-128 encryption
• Features IEEE 802.1x which meets IT authentication requirements for improved network security

AES67-compatible

• OmniStream supports industry standard, AES67-compatible networked audio streams to decoders and audio interfaces
• Supports multi-channel PCM up to 7.1 channels

Simultaneous OmniStream and AES67 audio streaming

• OmniStream encoders can deliver native OmniStream RTP networked audio alongside an AES67-compatible audio stream
• Encoders also can provide multi-channel PCM audio downmixing
• Allows for streaming multi-channel PCM to OmniStream decoders, plus downmixed PCM audio to an OmniStream 238 audio bridge

Enhance AV presentations with visual enhancements

• Provide corporate or institutional branding by overlaying a logo
• Display a full-screen image as a backup in an event of an interruption in an AV stream, or between presentations
• Identify and label presentation content with static or scrolling text

EDID management

• Manages EDID communications between source and encoder; allows integrators to force a source to a preferred resolution
• Ensures desired audio formats and video resolutions are provided to the AV system
• EDID can be assigned from a display connected to an OmniStream decoder

Encoder grouping

• Assign up to eight encoders to a logical group
• Allows a decoder to automatically switch between encoders in the group upon input detection
• Create scalable, flexible switching systems with encoders placed wherever AV sources may be located

Audio processing and pass-through

• Streams PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS® Digital Surround™, DTS-HD Master Audio™, and DTS:X®
• Supports multi-channel PCM audio downmixing to two-channel PCM

Integrated Ethernet link testing (coming soon)

• Tests integrity of the network infrastructure between encoders and decoders (cabling, terminations, switch, bandwidth)
• Allows quick, easy verification or troubleshooting from the encoder and decoder web GUI – no need to visually check each display location
• Encoder delivers a full-bandwidth stream (900 Mbps) of test data packets to decoders joined to a multicast group
• Reports percentage of packets successfully received at each decoder

System management

• Intuitive standalone web GUI
• Atlona Management System (AMS) – web-based interface for configuration and management of OmniStream systems, and AV over IP cross-connections

Included accessories

• Installation guide, interchangeable black and white wallplates and faceplate

Wallplate Networked AV Encoder

The Atlona OmniStream™ 111 WP (AT-OMNI-111-WP) is a single-channel networked AV encoder for HDMI sources up to UHD @ 60 Hz and HDR (High Dynamic Range), plus embedded audio. It features a US two-gang, wallplate form factor, and includes interchangeable black and white wallplates and faceplates. The OmniStream 111 WP is part of the OmniStream Pro Series, designed for high performance, flexible distribution of AV over standard, off-the-shelf Gigabit Ethernet switches in commercial audiovisual applications. It is HDCP 2.2 compliant and ideal for the latest Ultra High-Definition and HDR sources. This networked AV encoder features advanced high-quality, VC-2 visually lossless video compression technology with user-selectable, video quality optimization engines designed for computer-generated imaging, or motion video content. The Atlona OmniStream 111 WP achieves extremely low, sub-frame latency when paired with OmniStream AV decoders.

With its wallplate form factor, the OmniStream 111 WP enables convenient installation wherever an aesthetically appealing or discreet AV source connection is required.
 

Easy to Configure, Simple to Manage

OmniStream AV over IP systems are remarkably easy to set up and manage – whether for a meeting room, residence, divisible room, or an entire university campus. Atlona Management System (AMS) 2.0 features automatic network device discovery, plus an intuitive web-based GUI that lets you configure virtual routing for AV, control, and data over the network – just as easily as you would with conventional AV matrix switching. AMS also streamlines and simplifies management of OmniStream systems through continuous system monitoring, notifications and alerts, event logging, multi-device configuration and backup, automated firmware updates, remote device control, and more.

Product Compatibility

The OmniStream 111 WP is compatible with the OmniStream 121 decoder. It is also compatible with the OmniStream 521 decoder when Video Optimization is set to Motion Video mode.

Designed for Pro AV Integration

The OmniStream 111 WP includes several features for optimizing integration and enhancing professional AV presentations. EDID and HDCP management features ensure reliable, consistent system operation and compatibility with source devices. EDID management includes the option to assign an EDID captured from a display at an OmniStream AV decoder. Aspect ratio controls are available to specify the presentation viewing format as desired by the end user. Additionally, OmniStream offers the option to overlay a logo image (PNG with transparent background) onto an AV presentation for corporate or institutional branding. A full-screen image can also be displayed, as a backup in an event of an interruption in an AV stream, or to display information between presentations.

Ethernet Link Testing (Coming Soon)

OmniStream AV over IP systems feature Ethernet link testing, a convenient feature for integrators and technicians to test integrity of the network infrastructure. Testing is initiated from the encoder web GUI, and performed between an encoder and decoders joined to it in a multicast group. Test results can be monitored from the encoder and decoder web GUI, avoiding the need to visually check for an image at each display location.

Applications

• Enterprises and other large organizations – Maximize AV application flexibility by enabling content sharing within single meeting rooms, or corporate-wide broadcasting to every connected screen.
  (See this featured application as an example.)
• Corporate and university campuses with the need to distribute AV between buildings – OmniStream allows virtually unlimited AV system scope and scale. For very large, expansive LANs, SMPTE-standard FEC (Forward Error Correction) ensures robust, reliable image presentation at every endpoint.
  (See this featured application as an example.)
• Applications in which any AV content or resource can be shared anywhere in the system – AV over IP technology removes the restrictions associated with interconnecting sources and displays through standard matrix switching architecture.
• Meeting rooms and conference rooms – An IP network infrastructure makes it simple and efficient to design AV systems for small, large, and divisible meeting room configurations, and to centrally manage them throughout a facility.