Neomounts PLASMA-C100
- Barva: srebrna
- Dolžina: opcijsko
- Nosilnost: do 50 kg
- Podprta diagonala: od 37" do 75"
- Višina: 670-1070 mm
The Atlona AT-UHD-EX-70C-RX is an HDBaseT receiver for AV signals up to 70 meters over category cable with RS-232 and IR control pass-through, plus Power over Ethernet capability. It is compatible with video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48 V Power over Ethernet. The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
Ste našli nižjo ceno?
Kupujete večjo količino?
Potrebujete ponudbo za nadaljnjo prodajo?
Za izboljšanje cene pošljite povpraševanje.
FEATURES
4K/UHD capability
HDCP 2.2 compliant
Supports 4K HDR10 @ 24 Hz
Remote-powered receiver
Bidirectional extension of both RS-232 and IR control commands
Long distance HDMI extension
Flexible Bidirectional IR control capabilities
Rear panel I/O connectors
Multi-channel audio compliant
Field updatable firmware
Front panel Power and Link status LEDs
Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
Included accessories
The Atlona AT-UHD-EX-70C-RX is an HDBaseT receiver for AV signals up to 70 meters over category cable with RS-232 and IR control pass-through, plus Power over Ethernet capability. It is compatible with video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48 V Power over Ethernet. The AT-UHD-EX-70C-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for easy installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by an Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through RS-232 commands.
Prijavite se in bodite na tekočem s svetom avdio-video tehnologije.
Enkrat mesečno vam bomo pošiljali:
Spletna stran uporablja piškotke za zagotavljanje boljše uporabniške izkušnje in funkcionalnosti spletnega mesta. Več informacij o piškotkih najdete tukaj:
Prijavite se in bodite na tekočem s svetom avdio-video tehnologije.