Kategorije
Brezplačno svetovanje +386 (0)1 620 77 25
Moj račun
0
0
Dostava: Brezplačna
Skupaj: 0,00 €
Pregled košarice Kreiraj projekt

Switcher Atlona AT-HDVS-200-TX

Atlona
Šifra: AT-HDVS-200-TX

The Atlona AT-HDVS-200-TX is a 3 × 1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control, and Ethernet can be transmitted up to 100 meters. The two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT transmission. The HDVS-200-TX is designed for use with the AT-OME-RX21 4K scaling receiver, but can also be used with Atlona switchers and matrix switchers with HDBaseT inputs. This transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic input selection and display control. It is remotely powered by the OME-RX21 or other Atlona devices over HDBaseT.

Cena:
1.122,40 €
Nižja cena

Ste našli nižjo ceno?
Kupujete večjo količino?
Potrebujete ponudbo za nadaljnjo prodajo?

Za izboljšanje cene pošljite povpraševanje.

920,00 € (brez 22 % DDV)
Naziv
Naziv
Three-Input Switcher (HDMI and VGA)
Opis izdelka in datoteke
Opis izdelka in datoteke

FEATURES
 

3 × 1 HDBaseT switcher

  • Features two HDMI inputs plus a VGA input with audio
  • Allows advanced HDMI display devices to be used with legacy VGA sources
  • Audio input can be assigned to any of the video inputs
  • Audio-only playback available without video signal present

Remotely powered via PoE (Power over Ethernet)

  • IEEE 802.3af PoE Powered Device (PD)
  • Power for transmitter is supplied by the AT-OME-RX21 or other Atlona device over HDBaseT
  • Saves time and integration costs
  • AT-HDVS-200-TX-PSK available for applications where the transmitter with an external power supply is needed for use with an HDBaseT-equipped projector or third-party HDBaseT receiver

Automatic display control

  • Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
  • Enables display and volume control. CEC enables control of consumer displays.
  • Eliminates the need for a complex AV control system

Automatic input selection using hot plug detect and video detection technology

  • Selects active input when sources are connected or if there is a change in source power status
  • Enables simplified, automatic system operation with no user intervention necessary

TCP/IP and RS-232 control of switcher

  • Flexible control options for compatibility with third-party control systems
  • Reduces integration time and costs

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

  • Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
  • Allows 4K/UHD transmission when used with a compatible HDBaseT-equipped display or HDBaseT receiver, such as the AT-OME-RX21

HDCP 2.2 & 1.4 compliant

  • HDCP 1.4 compliant when used with the AT-HDVS-200-RX
  • HDCP 2.2 compliant when used with an HDCP 2.2 compliant receiver or switcher, such as the AT-OME-RX21
  • Allows protected content stream to pass between authenticated devices

Extended distance HDBaseT extension

  • Transmits AV, control, and Ethernet up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

EDID management

  • Manages EDID communications between source and switcher; allows integrators to force a source to a preferred resolution
  • Ensures desired audio formats and video resolutions are provided to the AV system

HDCP management

  • HDCP compliance can be disengaged through AMS or a control system
  • Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

Front panel input select button

  • Overrides auto-switching when more than one active source is present
  • Simple manual operation allows presenter to maintain control of AV system

Front panel display on/off control

  • Remotely controls display power state
  • Alternate mode available to mute video output and send display into standby
  • Eliminates need for manual operation of display or use of IR remote control

Front panel volume control

  • Remotely controls a display’s internal audio volume using TCP/IP or RS-232
  • Muting also available via AMS or third-party control system
  • Eliminates need for manual operation of display or use of IR remote control

Integrated HDBaseT link status monitoring

  • Continuously monitors integrity of the HDBaseT cable link between the transmitter and the receiver
  • Web GUI provides real-time link status, plus detailed HDBaseT and HDMI signal information
  • Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality

Configured and managed by AMS (Atlona Management System)

  • This IP-controllable product is remotely managed by the Atlona Management System software
  • Integrates product configuration, management, and updates to reduce installation time and enable remote support

Field-updatable firmware

  • Rear panel USB port provides an easy means for device updates
  • Ensures long-term system return on investment

Front panel power and input selection status LEDs

  • LED indicators provide power and input selection status information
  • Provides easy setup and troubleshooting

Included accessories

  • User guide and surface mounting brackets


The Atlona AT-HDVS-200-TX is a 3 × 1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control, and Ethernet can be transmitted up to 100 meters. The two-channel audio input can be assigned to any of the video inputs and embedded for HDBaseT transmission. The HDVS-200-TX is designed for use with the AT-OME-RX21 4K scaling receiver, but can also be used with Atlona switchers and matrix switchers with HDBaseT inputs. This transmitter can serve as an integral component of a fully automated AV system, with the convenience of automatic input selection and display control. It is remotely powered by the OME-RX21 or other Atlona devices over HDBaseT.


All-in-One Switcher, Controller, and Extender

The HDVS-200-TX combines the benefits of auto-switching and integrated display control, and the advantages of HDBaseT signal transmission. It enables input selection, volume, and display on/off control from the front panel or external RS-232 or TCP/IP commands. The HDVS-200-TX incorporates many popular integration convenience features while delivering excellent value for classrooms, huddle rooms, and meeting spaces.

Surface mounting brackets are provided with the HDVS-200-TX for easy under-table, furniture, or on-wall installation.


Automatic Display Control

The HDVS-200-TX provides control to a display through TCP/IP, RS-232, or CEC*, without the need for a separate control system. This simplifies system design and integration while reducing costs. With automatic display control, the HDVS-200-TX can trigger a display to power on automatically whenever a laptop or other device is connected. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-200-TX forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. The HDVS-200-TX display control capability can also be triggered by an external control system.

A power button on the front panel can be used for manual on/off control of either the HDVS-200-TX or the display. Front panel volume controls are also available to control the display’s internal audio, or another device with volume control, such as a DSP or another switcher.
 

Reliable Auto-Switching

The HDVS-200-TX automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.


Applications

  • Complete system applications – The HDVS-200-TX and OME-RX21 together provide a compact, yet comprehensive and cost-effective system integration solution with automatic input selection, HDBaseT extension, display control capabilities, room control, and essential audio processing. (See this featured application as an example.)
  • Larger system applications – The HDVS-200-TX is ideal for extending AV connectivity from a central equipment rack to remote locations such as lecterns and conference tables, where presenters can easily access the system. (See these featured applications as examples: small conference room, larger conference room, and divisible room.)
  • Applications requiring local power – The AT-HDVS-200-TX is available with an external power supply as the AT-HDVS-200-TX-PSK kit for applications where AV and control must be extended to a third-party receiver, or a display with an HDBaseT input.
Tehnične specifikacije
Tehnične specifikacije
Naziv
Three-Input Switcher (HDMI and VGA)
Pošlji povpraševanje
Pošlji povpraševanje
Odgovorili bomo v najkrajšem možnem času.

Vsa polja so obvezna.
Newsletter

Prijavite se in bodite na tekočem s svetom avdio-video tehnologije.

Kaj boste dobili s prijavo na e-novice?

Enkrat mesečno vam bomo pošiljali:

  • posebne ugodnosti
  • akcije in prihranke
  • novosti iz avdio-video sveta
  • strokovne nasvete